Livestock transport trucks are mainly used for the transportation of live poultry, such as chickens, ducks, pigs, sheep, etc. The barn-grid type is the most common structural form, and nowadays, a kind of livestock and poultry trucks with a van structure is popular. Poultry trucks have the advantages of high transportation efficiency, maximum guarantee of the quality of live poultry transportation, simple operation and cleaning, etc., which are the development trend of livestock and poultry trucks in the future. So what configuration does this type of livestock and poultry truck consist of?

Van-type livestock and poultry trucks are mainly composed of chassis, upper body, hydraulic system, etc. The configuration of the chassis is generally well understood by everyone. The main accessories are the engine, gearbox, axle, tire, cab, etc., different It is top loading. There are roughly two types of top loading for van-type livestock and poultry vehicles. The first is similar to the refrigerated truck body, and the second is the aluminum alloy body.

The first structure, insulation box: the interior and exterior use glass fiber reinforced plastic with a polyurethane insulation layer in the middle, which is generally set as a rear door. The periphery of the box body is wrapped with aluminum profiles and stainless steel corners. The overall solidity is good, and the insulation effect is also good;

Ventilation and heat preservation system: Ventilation fans are installed on both sides of the car body according to the size of the area to ensure air circulation inside the car body. The inside of the car body can be layered, and each layer can be designed with separate columns. Several ventilation fans and on-board air conditioners are installed on the top of the car body.

This type of truck is mostly used to transport chicks, piglets and other young birds.

The second type: aluminum alloy van box: the van box is mainly made of aluminum alloy profiles, which has the advantages of light weight and beautiful appearance; the design of some layers in the van box, and each layer can be divided into columns according to the needs, which can prevent live birds from crowding and causing casualties；

Ventilation system: Ventilation fans are also installed on both sides of the compartment to ensure air circulation inside the compartment and ensure that the live birds are in a good transportation environment;

Loading and unloading system: a hydraulic tail plate is installed at the rear, a generator and an operating device are installed under the chassis, which can realize the remote lift of the tail plate, which is convenient for loading and unloading;

Feeding and spraying system: each pen is equipped with a feeding system and a spraying system. The drinking nozzle is used for drinking water for live birds, and the spray nozzle is used for spraying and cooling live birds;

Monitoring system: Each floor is also equipped with lights and cameras, and a monitoring panel is installed in the cab to observe the live birds inside the car at all times. The temperature and humidity detector is also a necessary device to adjust the internal temperature of the car according to the actual situation. Humidity to ensure that live birds are in the most suitable transportation environment;

Operation box: Generally, there is a special operation box in the front of the truck, which is equipped with heating units, air conditioners, operating systems, etc., and the operations inside the car body can be realized in the operation box or in the cab.

Sewage and drinking water system: A sewage discharge port and a clean water tank are also provided in the lower part of the compartment to discharge sewage and live poultry drinking water.

This kind of aluminum alloy livestock and poultry trucks are mostly used to transport breeding pigs, adult pigs and so on.