Aerial work trucksare often used in the high-altitude operation range of municipal wires, street lamp maintenance, high-rise exterior wall maintenance, highway billboard maintenance, etc. The chassis of the aerial work vehicle is composed of the chassis of the car plus the lift. Because it requires long-term use and high-altitude operations, the vehicle chassis requires a higher strength in the manufacturing process than the chassis of other ordinary cars. In order to be able to well guarantee the safety factor of personnel who need to work at high altitudes for a long time, their operators need to pass comprehensive safety knowledge training before they can start work. Then there are several safety common senses about aerial work vehicles:

1. When performing high-altitude work on high-rise buildings or high-voltage lines, etc., it is necessary to pay attention to the need to keep a safe distance from the lift. However, if you need to get close to it in some unavoidable circumstances, you should let other staff observe the surrounding situation more, evacuate the crowd, and maintain a normal conversation.

2. When the operator of the aerial work vehicle is performing high-altitude operations, he must wear the prescribed safety clothing and related machinery to ensure good communication between the upper and lower personnel. Communication equipment and communication gestures are also necessary. In addition, you cannot not wear safety clothing and machinery because of the low operating height. These common sense are the basic safety awareness that must be known when performing high-altitude operations. The staff operating at high altitudes must have good communication skills with the personnel below, be equipped with communication equipment, and be familiar with communication gestures. When working, every misunderstanding of the gestures used in communication will cause inevitable losses.

3. Check and maintain the hydraulic system, lift, and brake system of the aerial work vehicle on time and regularly. The hydraulic system also includes the hydraulic oil tank and various high-pressure oil pipes. Carefully check whether the hydraulic oil is missing. According to the position of the oil plane of the hydraulic oil tank, check whether the high-pressure oil pipe is aging. The high-pressure oil pipe is often exposed to the outside and is easy to age. Once the oil pipe is aged, the high-pressure oil pipe may burst, causing the lift to drop suddenly, and finally causing danger! Then check whether the connection of each movable joint of the lift is normal. If it is loose, it must be tightened immediately with tools.