Detachable container garbage truck which is also called as hook arm garbage truck, it is mainly used in municipal sanitation, property management, large factories, industrial and mining and other places to collect and carry various garbage. The hook-arm garbage truck adopts a full hydraulic control system, and the garbage box and the chassis can be completely separated. It has the advantages of reasonable structure, simple operation, stability, high use efficiency, good sealing performance, and convenient dumping. It can realize one truck and multiple garbage. Combined operation of boxes and circular transportation can fully improve the transportation capacity of vehicles.

The hook-arm garbage truck is composed of a special device and a garbage can with a garbage can hook-arm tilting mechanism installed on the basis of the truck chassis.

The hook-arm garbage truck adopts high-tech design and can swing the hook arm. One truck can carry multiple large compartments, which is convenient for loading and unloading, realizes the secondary hoisting of the compartment and makes the mechanism the most labor-saving. manpower and other advantages. Hook-arm garbage trucks can be equipped with several garbage transfer boxes based on user requirements. The transfer box can be used as a simple, beautiful and environmentally friendly waste transfer station, which maximizes the efficiency of the vehicle.

1. Steps of loading the garbage hopper

①After starting the engine, turn on the power take-off, push the locking hook operating handle down to the retracted position, retract the locking cylinder, and turn down the locking frame. Tightly fix it, loosen the handle to make it return to the neutral position;

②Pull the operating handle of the pull arm to the extended position, the pull arm oil cylinder extends, the movable pull arm rotates around the front hinge axis of the overturn frame, and the garbage box is turned over and tilted down together with the movable pull arm; It is strictly forbidden to stand at the rear.

③After the garbage hopper is placed, adjust the position of the movable trolley hook and the hook of the box to make it unhooked, push the trolley operating handle down to the falling position, retract the trolley cylinder, and move the movable trolley around the front hinge of the turning frame. The shaft rotates, the movable pull arm is put back on the attached frame, the power take-off trash can is released and the placement is completed, and the whole vehicle can be transported and driven.

2. Steps of pulling up the garbage box of the garbage truck

①Push the locking hook operating handle to the retracted position, retract the locking oil cylinder, retract the locking frame, and lock and fix the flip frame and the attached frame;

②Pull the operating handle of the trolley to the extended position, the trolley cylinder is extended, the movable trolley rotates around the front hinge axis of the flip frame, the trolley is in the hook box position, and the height of the trolley hook is properly adjusted and aligned with the box body. allow;

③When the hook of the pulling arm is hooked to the hook of the box body, continue to push the operating handle of the pulling arm to the falling position, so that the garbage box can continue to be loaded;

④After the garbage box is dropped on the attached frame, loosen the operating handle of the pull arm to make it return to the neutral position, then pull up the operating handle of the locking hook to the locking position, and the locking cylinder extends to make the locking Turn up the rack and lock and fix the overturn rack and the garbage box body, loosen the handle to make it return to the neutral position; Complete the loading work of the garbage truck box body, release the power take-off, and the whole vehicle can be transported and driven.