This wrecker has the functions of lifting, pulling, lifting, etc. It is convenient, quick, good-looking, safe and reliable. This truck wrecker is widely used in highways, public security traffic police, airports, terminals, auto repair industry and highway companies, etc.
Wrecker truck equipped with lifting winch device and wheel bracket which can lift, towing, back load and transport.Widely used in road, police traffic, airports, docks, auto repair company, industry and highway departments, timely, fast clean-up accident, failure, illegal and other vehicles.
Road wrecker is used for safety salvage of vehicles subject to city road, suburb way, highway, airport and bridge road. It is suitable for medium and small-sized cargos, cars and other special vehicles, which are allowed within the technical parameters of this kind
The tow wrecker is called the road wrecker, also known as road rescue vehicle. It has many functions such as lifting, pulling and lifting traction.
The INT series is out integrated line of tow trucks commonly called wreckers. We have a wide range of products with 6 different models ranging for the small 3 ton to the massive 60 ton with a 3 stage boom.
The gearbox is one of the important parts of the concrete mixer truck. Properly operated gearboxes can save the vehicle fuel consumption. Correctly operate the gearbox and extend its service life. So when you drive the mixer truck, you must control it. Fully understand the gearbox, there are still some things that need to be paid attention to during the use of the concrete mixer truck gearbox. get more information about CL self loading concrete mixers.
1. When the mixer truck is shifting, the clutch must be completely separated, and the gear lever must be in place.
2. The mixer truck gearbox has high and low gears. When parking, the gear lever of the gearbox should be placed in the low gear neutral position.
3. When the mixer truck is in low gear or reverse gear, stop first, and then gear in order to avoid damage to the internal parts of the transmission. When in reverse gear, use a larger gear to overcome the resistance of the reverse gear lock.
4. When the transmission shifts from low gear to high gear, do not skip gear operation, otherwise it will affect the service life of the auxiliary case synchronizer.
5. When the mixer truck is going downhill, it is forbidden to change the high and low gear zones.
6. The mixer truck should start with 1 or 2 gears according to the road conditions.
7. Before the mixer truck starts, the brake should be released. The multifunctional mixer truck with cut-off brake must wait for the air pressure to rise to the pressure required to release the brake before it can start in gear after turning on the brake valve.
8. During the use of the mixer truck, if abnormal noises are found in the transmission, or the operation is obviously heavy and other abnormalities, stop and check immediately, and continue driving after the fault is eliminated.
9. If the mixer truck cannot be put into the gear when shifting, be sure to check the cylinder and its gas path first to ensure that the auxiliary box enters the gear.
10. The gearbox of the mixer truck is generally not allowed to be disassembled and assembled without permission during the "Three Guarantees" period.
The gearbox of the mixer truck must be matched with the engine, and the gear position must match the speed, so that it can be more fuel-efficient during the use of the mixer truck.
please read on, stay posted, subscribe, and we welcome you to tell us what you think.
online service
0086-27870584170086-7223801382
info@chengli-trucks.com
truck0809
8615072324118
