This wrecker has the functions of lifting, pulling, lifting, etc. It is convenient, quick, good-looking, safe and reliable. This truck wrecker is widely used in highways, public security traffic police, airports, terminals, auto repair industry and highway companies, etc.
Wrecker truck equipped with lifting winch device and wheel bracket which can lift, towing, back load and transport.Widely used in road, police traffic, airports, docks, auto repair company, industry and highway departments, timely, fast clean-up accident, failure, illegal and other vehicles.
Road wrecker is used for safety salvage of vehicles subject to city road, suburb way, highway, airport and bridge road. It is suitable for medium and small-sized cargos, cars and other special vehicles, which are allowed within the technical parameters of this kind
The tow wrecker is called the road wrecker, also known as road rescue vehicle. It has many functions such as lifting, pulling and lifting traction.
The INT series is out integrated line of tow trucks commonly called wreckers. We have a wide range of products with 6 different models ranging for the small 3 ton to the massive 60 ton with a 3 stage boom.
Concrete mixer truck is abbreviated as mixer truck. The driving environment of mixer trucks is generally poor. Many mixing stations are built in ravines, and most of the construction sites are in urban areas. Therefore, the mixer trucks must drive on winding mountain roads. , It also has to pass through urban areas where vehicles are concentrated, and the mixer truck itself has a high center of gravity. It is very difficult to drive, and the concrete transported by the mixer truck is very important to the quality of the entire building, so the mixer truck driver The responsibility is very important, and there are many details to be mastered in the work, otherwise no matter which aspect of the problem is very serious.
As a driver of a mixer truck, you must pay attention to the following points:
1. The quality and slump of the concrete transported by the mixer truck must meet the standards and requirements of the concrete industry.
2. If a small mixer truck runs on the road, the extended trough on it must be placed on the support of the discharge chute and fixed with a hook. It is not allowed to hang on the main discharge chute to work, and the main discharge chute must be rotated to be fixed. Pull down the positioning handle, and use the locking handle to lock the spring luffing structure to avoid shaking due to unfixed, causing injury and other accidents.
3. The continuous working time of the equipment on the mixer truck cannot exceed 8 hours.
4. The loading tank of the large mixer truck cannot be stopped during the concrete transportation process, otherwise it will cause the concrete to condense, and the hydraulic system and reducer will be impacted when restarted after the stop, and the hydraulic pump and motor will be damaged.
5. When the mixer truck is unloading, if it is found that the concrete moisture has evaporated too much and the slump is too low to meet the quality requirements, you can add water to the tank appropriately, and then rotate it at a speed of 10-14 rpm for 30 minutes Then discharge the material and let the concrete mix fully.
6. The mixer truck should not stop when loading the tank body under no load. Otherwise, the shaking of the vehicle during the driving process will easily cause part of the raceway and the supporting wheel to collide, so that the supporting wheel and the raceway will be damaged prematurely.
7. The driver of the mixer truck should remember that the water in the pressure tank must be filled up frequently during the work process. It is necessary to open the air valve to release the internal air before adding water to the tank, and after washing the vehicle or when it is out of service. Let the air out of the water tank. In winter, the water in the water tank should be drained after the work is finished. There must be no leftover water, otherwise the water tank will easily freeze and damage the water tank.
8. When the concrete mixer truck is full of concrete, the tank rotates forward. If you need to reverse, you must wait for the tank to stop before turning the handle to the reverse position.