This wrecker has the functions of lifting, pulling, lifting, etc. It is convenient, quick, good-looking, safe and reliable. This truck wrecker is widely used in highways, public security traffic police, airports, terminals, auto repair industry and highway companies, etc.
Wrecker truck equipped with lifting winch device and wheel bracket which can lift, towing, back load and transport.Widely used in road, police traffic, airports, docks, auto repair company, industry and highway departments, timely, fast clean-up accident, failure, illegal and other vehicles.
Road wrecker is used for safety salvage of vehicles subject to city road, suburb way, highway, airport and bridge road. It is suitable for medium and small-sized cargos, cars and other special vehicles, which are allowed within the technical parameters of this kind
The tow wrecker is called the road wrecker, also known as road rescue vehicle. It has many functions such as lifting, pulling and lifting traction.
The INT series is out integrated line of tow trucks commonly called wreckers. We have a wide range of products with 6 different models ranging for the small 3 ton to the massive 60 ton with a 3 stage boom.
The reducer is generally composed of a box body, reducer accessories, gears, shafts and bearings.
First look at the outer shell: it is an important part of the reducer and the base of the transmission parts. It must have sufficient strength and rigidity. The box is usually made of gray cast iron. It can also be used for heavy-duty or impact-loaded reducers. In order to simplify the production process and reduce the production cost, the steel box body can be welded by steel plate.
by the accessories of the reducer: the accessories of the reducer contain more things, such as the lubricating oil of the accelerator. Pay attention to the height of the oil level, oil discharge, and oil filling during normal use.
The last is the combination of gears, shafts and bearings: the pinion and the shaft are made into one body, called the gear shaft. This structure is used when the diameter of the gear is not related to the diameter of the shaft. If the diameter of the shaft is d, the gear root circle The diameter of is df, when df-d≤6——7mn, this structure should be adopted, and when df-d>6——7mn, the structure of the gear and shaft separated into two parts, such as low-speed shaft With the large gear, the gear is connected with the shaft with the axial fixed flat key at this time. The parts on the shaft are axially fixed by the shoulder, sleeve and bearing cover. Both shafts adopt deep groove ball bearings.