Road wrecker trucks are mainly used for the transfer of road failure vehicles, urban illegal vehicles and emergency rescue, etc. It can be divided into flatbed type, tow-lift combined, tow-lift separation, and multi-function types, of which flatbed wreckers is also called one for two wrecker truck. What are the characteristics of the manufacturing process of this wrecker?

1. The flat plate of the flatbed wrecker truck is made of high-quality steel plate, which is stamped and formed at one time with a stamping abrasive tool. The surface of the plate is flat, high in strength and relatively durable; the other is cold stamped and formed, which has far strength, rigidity and flatness. The flat structure board is higher than the general bending forming pattern, the flat structure is specialized, and the modular production is performed. Each component is accurately manufactured and has strong interchangeability. Other wreckers use cathode electric pulse treatment to effectively ensure their anti-corrosion performance.

2. All hydraulic parts of the wrecker truck are made of well-known brands at home and abroad, and there is no mixed installation of three-no products, which will not affect product quality.

3. The inclined column is arranged on the inner side of the beam and supported on the same beam. The load is evenly distributed, which greatly improves the service life of the vehicle: the friction plate, the rear landing of the roller, the smooth sliding of the plate surface, and the low maintenance cost. The machine is adjustable to make the plate locking more accurate, reliable and safe; the plate bottom beam and folding hinge beam are strengthened to further improve the load-bearing capacity, a variety of tools, easy to use and operate.

4. Lifting mechanism: The wrecker uses the stretching, lifting, loading and folding actions of the arm to lift the damaged vehicle from the front or rear, and then remove the entire vehicle from the scene. The bracket of the wrecker has many structural forms, and it can usually lift the axle, wheel, leaf spring, frame, etc. of the accident vehicle for easy assembly and disassembly.

5. The full hydraulic drive operation of the flatbed wrecker integrates lifting, anti-loading, towing and other functions. The hydraulic pipe adopts high-pressure galvanized steel pipe, which has high pressure resistance, good heat dissipation performance, beautiful appearance, durable, and the service life can be synchronized with the upper load. Imported valves are used to optimize the installation method to ensure the safe operation of the multi-way valve under various extreme working conditions. The inner wall of the cylinder is rolled by a boring machine. The inner wall of the cylinder is hard, wear-resistant and clean, and the seals are fully protected; the piston rod is heat treated with high hardness and thick plating, which can be easily operated with high intensity.