Compression garbage trucks are widely used in the collection and transfer of domestic garbage. Because it has the advantage of being compressible, it has a higher transfer efficiency and a higher share in garbage trucks. With the gradual deepening of garbage classification, the compressed garbage truck collects, compresses, and transfers the garbage in the sorted garbage bins, which is a relatively efficient processing process.

Compressed garbage trucks are often referred to as compression trucks. In fact, side-load compression garbage truck is also an important branch of compression garbage truck.

Both side-load compression garbage trucks and rear-load compression garbage trucks collect and compress the garbage into the cabin and compress and transfer it.

As the name suggests, the most obvious difference between a side-load compression garbage truck and a rear-load compression garbage truck is the loading method, one from the side and one from the rear.

Compared with the rear-load compression garbage truck, the side-load compression garbage truck has a relatively simple structure, low failure rate, more affordable manufacturing cost, easy maintenance, and lower operating costs. The compression capacity is similar to that of the rear-load compression garbage truck. After optimization, it even surpassed the post-installed compression garbage truck, so it is also very popular with users.

The disadvantage of side-load compression garbage trucks is that they can only hang buckets. The elevator can cooperate with various specifications of trash cans, such as GB 120, 240L plastic buckets, round iron buckets, 660L standard buckets, etc., but it can only be loaded by hanging buckets.

Another disadvantage is that the space required when the bucket elevator is used to lift and dump the trash can is high, and it has certain limitations for indoor operation, especially in the underground.

The side-load compression garbage truck is improved on the basis of the hanging bucket garbage truck (self-loading and dumping garbage truck). Compared with the hanging bucket garbage truck, the main improvement is the box structure and the rear door sealing and locking. Way, the built-in compression shovels are added, and the sewage tank is installed.

In this way, the box can withstand greater pressure. The compression push shovel can compress the domestic waste loaded by the bucket elevator. The compression push shovel can be equipped with full stroke and half stroke. The discharge method can be equipped with dump. Or push the shovel to push the discharge. The sewage tank can collect the sewage in the compressed domestic garbage to avoid dripping.

Optional with electric control operation, the operation is simpler and the labor intensity is lower. You can also choose not to install the built-in compression shovels and configure it to be frugal.

The rear loading compression type garbage truck loads the garbage into the rear hopper by the lifting mechanism. The scraper and the skateboard cooperate to press the garbage in the rear bucket into the compression box, and the compression pusher in the box compresses in two directions, and the compression efficiency is high. The entire operation process is controlled by PLC programmable electricity, which can be cycled with one key and easy to operate. However, the structure is more complicated and the cost is higher than the side-load compression garbage truck.

Garbage lifting mechanism can choose hanging bucket type (GB 120, 240L plastic bucket, round iron bucket, 660L standard bucket, etc.), triangle bucket type, triangle bucket with hanging bucket type, large floor bucket type, swing arm type Structure, so that it can be used with different collection methods at the grassroots level such as trash cans, trash cans, and human tricycles, and the scope of application is wider.

The installation position of the hanging bucket elevator of the rear-load compression garbage truck is relatively low. The maximum height of the bucket after the bucket is turned over does not exceed the height of the truck. Out of this space advantage.

Large floor bucket, the large floor bucket becomes the sealing cover of the rear filler of the compression garbage truck installed during the transfer after being lifted.

The above are the similarities and differences of side-load compression garbage trucks and rear-load compression garbage trucks and their respective advantages. Users can choose according to their actual use environment.