This wrecker has the functions of lifting, pulling, lifting, etc. It is convenient, quick, good-looking, safe and reliable. This truck wrecker is widely used in highways, public security traffic police, airports, terminals, auto repair industry and highway companies, etc.
Wrecker truck equipped with lifting winch device and wheel bracket which can lift, towing, back load and transport.Widely used in road, police traffic, airports, docks, auto repair company, industry and highway departments, timely, fast clean-up accident, failure, illegal and other vehicles.
Road wrecker is used for safety salvage of vehicles subject to city road, suburb way, highway, airport and bridge road. It is suitable for medium and small-sized cargos, cars and other special vehicles, which are allowed within the technical parameters of this kind
The tow wrecker is called the road wrecker, also known as road rescue vehicle. It has many functions such as lifting, pulling and lifting traction.
The INT series is out integrated line of tow trucks commonly called wreckers. We have a wide range of products with 6 different models ranging for the small 3 ton to the massive 60 ton with a 3 stage boom.
When the hydraulic system of the truck crane is under-pressured or has no pressure at all, the operating speed is slow or the lifting is weak. The operator of the truck-mounted crane should stop the operation immediately and resume the operation after troubleshooting. CLVEHICLES.COM crane truck inform you how to eliminate various methods of insufficient pressure in the truck crane hydraulic system.
1. See if the hydraulic pump can output hydraulic oil. If there is no hydraulic oil output, it may be: the steering of the pump is not correct; the parts are severely worn or damaged; the resistance of the oil suction pipe is too large (the oil filter is clogged, the oil viscosity is too high, etc.) or air leakage.
Remedy: Disassemble and clean the overflow valve; check or replace the spring to restore its working performance.
2. See if the entire hydraulic system can build up normal pressure. There is no pressure in some pipelines or hydraulic cylinders (hydraulic motors), which may also be caused by blockage of pipelines, throttle valves, reversing valves and other components.
Remedy: Check the pressure and whether there is oil passing through section by section, find out the reason, and eliminate it.
3. See if the overflow valve is working properly. If it is not normal, it may be that a valve in the pressure oil circuit has dirt or other reasons and is stuck in the oil return position, causing the pressure oil circuit to communicate with the overflow circuit. It may also be that the oil pipe joint is loose, or some valves in the pressure oil circuit are leaking seriously, or the seals of the hydraulic cylinder and hydraulic motor are damaged, causing serious leakage.
Remedy: Disassemble the relevant valve for cleaning, check the size of the sealing gap and various sealing devices. If the sealing device is damaged, it should be replaced.