This wrecker has the functions of lifting, pulling, lifting, etc. It is convenient, quick, good-looking, safe and reliable. This truck wrecker is widely used in highways, public security traffic police, airports, terminals, auto repair industry and highway companies, etc.
Wrecker truck equipped with lifting winch device and wheel bracket which can lift, towing, back load and transport.Widely used in road, police traffic, airports, docks, auto repair company, industry and highway departments, timely, fast clean-up accident, failure, illegal and other vehicles.
Road wrecker is used for safety salvage of vehicles subject to city road, suburb way, highway, airport and bridge road. It is suitable for medium and small-sized cargos, cars and other special vehicles, which are allowed within the technical parameters of this kind
The tow wrecker is called the road wrecker, also known as road rescue vehicle. It has many functions such as lifting, pulling and lifting traction.
The INT series is out integrated line of tow trucks commonly called wreckers. We have a wide range of products with 6 different models ranging for the small 3 ton to the massive 60 ton with a 3 stage boom.
Generally, the concrete mixer trucks made by large-scale refitting factories are not problematic. They all have a professional technical team. The design of the small cement mixer truck size and angle has been tested for many times, which can ensure that the vehicle is more convenient to use. Let's give everyone a general knowledge of the size and angle of the mixer truck.
1. The self loading concrete mixer truck should be able to transport the ready-mixed concrete with stirring capacity. When the ready-mixed concrete is stirred on a road with a slope of 14% and the discharge port faces the downward slope, there should be no spillage of the stirred ready-mixed concrete.
2. The distance between the upper mouth of the feed hopper and the ground should not be greater than 3800mm.
3. The feeding speed of the mixer truck should not be less than 2.7m³/min.
4. The discharge speed of the mixer truck should not be less than 0.65m³/min.
5. The volume of the water tank for tank cleaning of the mixer truck should not be less than 180L.
6. The pressure water tank should be equipped with a pressure reducing valve and an overflow valve to ensure that the pressure of the water tank is not greater than 0.4MPa, and the water tank should be able to withstand 1.5 times the maximum working pressure. In the air system directly supplied by the chassis air tank, there must be a sequence Valve to ensure the normal use of the chassis.
7. The mixing tank should be provided with 1-2 easy-to-open inlet holes with a diameter of not less than 450mm. In the case of an elliptical hole, its short diameter should not be less than 350mm, and it should be sealed well when closed.
8. The discharging trough should be able to rotate 180 degrees in the horizontal plane to adapt to different unloading positions, and the inclination angle to the horizontal should be adjusted in the vertical plane to adapt to different unloading heights.
Get more high quality cement mixer truck from https://www.clvehicles.com.
When you buy a mixer truck, don’t just pay attention to the price of the mixer truck. The configuration and production process should also be paid attention to.