This wrecker has the functions of lifting, pulling, lifting, etc. It is convenient, quick, good-looking, safe and reliable. This truck wrecker is widely used in highways, public security traffic police, airports, terminals, auto repair industry and highway companies, etc.
Wrecker truck equipped with lifting winch device and wheel bracket which can lift, towing, back load and transport.Widely used in road, police traffic, airports, docks, auto repair company, industry and highway departments, timely, fast clean-up accident, failure, illegal and other vehicles.
Road wrecker is used for safety salvage of vehicles subject to city road, suburb way, highway, airport and bridge road. It is suitable for medium and small-sized cargos, cars and other special vehicles, which are allowed within the technical parameters of this kind
The tow wrecker is called the road wrecker, also known as road rescue vehicle. It has many functions such as lifting, pulling and lifting traction.
The INT series is out integrated line of tow trucks commonly called wreckers. We have a wide range of products with 6 different models ranging for the small 3 ton to the massive 60 ton with a 3 stage boom.
1. After the new semi-trailer is received, it is necessary to check whether the ABS is working normally, and ensure that the trailer is inspected before the normal work, and the ABS work status needs to be checked before the car is reviewed every year to ensure the normal work and then the car is reviewed.
2. Regularly replace and clean the tractor dryer and filter to prevent dirt in the pipeline from damaging the ABS.
3, Every 15 days in winter (monthly in summer) to clean up the water in the main trailer and the trailer air reservoir, especially in the winter must pay attention, otherwise the valve in the pipeline can not move, the safety accident or impact Use performance.
4. Remove the dust or oil on the surface of the sensor and ring gear in time to maintain the axle or replace the brake shoe, and keep the ring gear or the front of the sensor clean.
5. When cleaning the axle or replacing the brake shoe, remove the dust or oil on the sensor surface, push the sensor to the ring gear direction to ensure that the sensor can contact the ring gear after the wheel is installed. When the wheel is moving, since the bushing is elastic, the sensor will automatically retreat to maintain the optimum working clearance (less than 0.75mm).
6. When replacing or maintaining the sensor, pay attention to whether the clamping force between the sensor and the elastic bushing is appropriate (clamping force should be 120~200N). If it is too small, the elastic bushing must be replaced.
7. Check the ABS wire harness and gas path for wear, interference, peeling and aging, and leakage.
8. Check and clean the dust, rust and other dirt inside each plug connector every month.
9. Check the ABS regulators and ECU fixing bolts and nuts loosely and tighten them in time.