This wrecker has the functions of lifting, pulling, lifting, etc. It is convenient, quick, good-looking, safe and reliable. This truck wrecker is widely used in highways, public security traffic police, airports, terminals, auto repair industry and highway companies, etc.
Wrecker truck equipped with lifting winch device and wheel bracket which can lift, towing, back load and transport.Widely used in road, police traffic, airports, docks, auto repair company, industry and highway departments, timely, fast clean-up accident, failure, illegal and other vehicles.
Road wrecker is used for safety salvage of vehicles subject to city road, suburb way, highway, airport and bridge road. It is suitable for medium and small-sized cargos, cars and other special vehicles, which are allowed within the technical parameters of this kind
The tow wrecker is called the road wrecker, also known as road rescue vehicle. It has many functions such as lifting, pulling and lifting traction.
The INT series is out integrated line of tow trucks commonly called wreckers. We have a wide range of products with 6 different models ranging for the small 3 ton to the massive 60 ton with a 3 stage boom.
When the garbage truck hydraulic system is not working properly. First check whether the garbage truck power take-off is correctly engaged, whether the hydraulic oil in the fuel tank is sufficient, and whether the suction pipe ball valve is fully open.
If the hydraulic mechanism of the garbage truck does not move, press the following steps to check accordingly.
1. Is the amount of oil in the hydraulic tank of the garbage truck sufficient? Hydraulic oil should be added when it is insufficient.
2. Observe whether the oil supply pipe from the garbage truck fuel tank to the oil pump is smashed due to aging. If this is the case, the inlet pipe should be replaced.
3. Check if the garbage truck fails the gear pump. Install the pressure gauge and turn the pressure regulating bolt to see if the watch reaches the specified value.
4. If the specified hydraulic pressure is not reached after the screw bolts of the garbage truck are fully screwed in, the gear oil pump fails and the gear oil pump must be replaced.
5. If the garbage truck gear oil pump works normally, the multi-way reversing valve spool is blocked. The valve plug should be removed to remove impurities and reloaded for use.