This wrecker has the functions of lifting, pulling, lifting, etc. It is convenient, quick, good-looking, safe and reliable. This truck wrecker is widely used in highways, public security traffic police, airports, terminals, auto repair industry and highway companies, etc.
Wrecker truck equipped with lifting winch device and wheel bracket which can lift, towing, back load and transport.Widely used in road, police traffic, airports, docks, auto repair company, industry and highway departments, timely, fast clean-up accident, failure, illegal and other vehicles.
Road wrecker is used for safety salvage of vehicles subject to city road, suburb way, highway, airport and bridge road. It is suitable for medium and small-sized cargos, cars and other special vehicles, which are allowed within the technical parameters of this kind
The tow wrecker is called the road wrecker, also known as road rescue vehicle. It has many functions such as lifting, pulling and lifting traction.
The INT series is out integrated line of tow trucks commonly called wreckers. We have a wide range of products with 6 different models ranging for the small 3 ton to the massive 60 ton with a 3 stage boom.
Don't step on the clutch if not necessary. The clutch on the concrete mixer truck is in a tightly engaged state during normal driving, and the clutch should not slip. When driving, do not step on the clutch or put your feet on the clutch pedal at any time except when the car needs to depress the clutch pedal for starting, shifting and low-speed braking. Putting your feet on the clutch pedal for a long time while driving can easily cause clutch slippage and clutch disc ablation. In severe cases, the clutch pressure plate and flywheel may even be ablated and strained, resulting in failures such as annealing of the clutch compression spring. At the same time, it will also lead to waste of fuel and vehicles, and increase travel costs.
Correct operation when starting. The operating essentials of the clutch pedal at the start are "one fast, two slow, three linkage". That is, when the pedal is lifted up, pick it up quickly; when the clutch is semi-linked (the sound of the engine changes at this time), the speed of the pedal lift is a little slow; from linkage to complete coupling, slowly pick up the pedal on the clutch When the pedal is raised, gradually step on the accelerator pedal according to the resistance of the engine to make the mixer truck start smoothly.
Correct operation when changing gears. When shifting gears while driving, the clutch pedal should be quickly stepped on and lifted up, and there should be no semi-linkage phenomenon, otherwise it will accelerate the wear of the clutch. In addition, pay attention to cooperate with the throttle during operation.
In order to make shifting smoothly and reduce the wear of the gear shift mechanism and clutch of the transmission, the "two-leg clutch shift method" is advocated. Although this method is more complicated to operate, it is a good way to save fuel and money while driving.