Start Cleaning Work

    1 Turn on the control box and point the control valve to the secondary valve position.

    2 start the auxiliary machine

    3 Point the auxiliary clutch control button to the combined position and the fan starts working.

    4 Point the vacuum box control to the lowered position

    5 Point the left or right swipe control to the lowered position

    6 Point the left sweep or the right sweep rotary knob to the forward position (clockwise on the left and counterclockwise on the right)

    7 Point the left spray, the right spray, and the spray control to the open position.

    8 Point the pump control to the open position

    9 Drive at the right speed and start cleaning

Finish Work

    1 stop driving

    2 Point the water pump control button, left water spray control button, right water spray control button, and rear water spray control button to the off position.

    3 Point the broom control to the middle position

    4 Point the dial control to the up position and then to the middle position

    5 Point the vacuum box control to the up, then to the middle position

    6 Point the sub-engine clutch control to the sub-position and then to the middle position

    7 Point the control valve control key to the middle position

    8 Shut off the auxiliary engine

    9 Turn off the power to the control box

Unloading garbage

    1 Turn on the power of the control box and point the control knob of the control valve to the position of the main valve.

    2 will start the main engine

    3 step on the clutch

    4 Open the additional oil pump clutch switch (pulling outward)

    5 Release the clutch at an appropriate speed

    6 Point the rear door control on the control box to the open position, and then point to the middle position after 5 seconds.

    7 Point the carriage control button to the up position. At any time, the control button can be pointed to the middle position according to the angle of the tilt of the carriage. At this time, the carriage is tilted up and stopped.

    8 Garbage cleaning

    9 After the garbage is cleaned, point the control button of the car to the lowered position. When the car is fully returned, point the control button to the middle position.

    10 Point the back door control to the off position, and then point to the middle position after 10 seconds.

    11 cleaning up garbage ends

    12 step on the clutch

    13 Close the additional pump clutch control (push in)

    14 Release the vehicle clutch at an appropriate speed

About us: CLVEHICLES.COM With 12 years professional experience on sweeper truck manufacturing, we provide extremely perfect solution on customer's requirement. Besides whole trucks, the superstructure parts without chassis is optional. We supply basic sweeper truck, high pressure sweeper truck , dry type sweeper truck, runway sweeper truck, etc.