This wrecker has the functions of lifting, pulling, lifting, etc. It is convenient, quick, good-looking, safe and reliable. This truck wrecker is widely used in highways, public security traffic police, airports, terminals, auto repair industry and highway companies, etc.
Wrecker truck equipped with lifting winch device and wheel bracket which can lift, towing, back load and transport.Widely used in road, police traffic, airports, docks, auto repair company, industry and highway departments, timely, fast clean-up accident, failure, illegal and other vehicles.
Road wrecker is used for safety salvage of vehicles subject to city road, suburb way, highway, airport and bridge road. It is suitable for medium and small-sized cargos, cars and other special vehicles, which are allowed within the technical parameters of this kind
The tow wrecker is called the road wrecker, also known as road rescue vehicle. It has many functions such as lifting, pulling and lifting traction.
The INT series is out integrated line of tow trucks commonly called wreckers. We have a wide range of products with 6 different models ranging for the small 3 ton to the massive 60 ton with a 3 stage boom.
The compartment of the dump truck is tilted backwards and laterally tilted. The piston rod movement is controlled by the operating system, and the backward tilting is more common. The piston rod is pushed to tilt the carriage, and a few are tilted in two directions.
HONGYAN Iveco dump truck
The high-pressure oil enters the lifting hydraulic cylinder through the distribution valve and the oil pipe, and the cab safety protection plate is arranged at the front end of the truck. The engine drives the hydraulic pump through the transmission and the power take-off device. The hydraulic tilting mechanism of the cabin is composed of a fuel tank, a hydraulic pump, a distribution valve, a lifting hydraulic cylinder, a control valve and a fuel pipe.
The engine drives the hydraulic pump through the transmission and the power take-off device. The high-pressure oil enters the lift hydraulic cylinder through the distribution valve and the oil pipe, and pushes the piston rod to tilt the truck. It is more common to tilt over in the future, and the steering of the piston rod can be controlled by the operating system to stop the truck at any desired tilt position. The cabin is reset using its own gravity and hydraulic control.
ISUZU dump truck
1. Do not suddenly push the lifting handle to the “down position” in the middle of full load lifting. If this operation is mistaken, the car suddenly rushes down, which will bring a lot of impact to the frame and even accidents. Therefore, the above operations should be avoided as much as possible. If there are special circumstances, you must also be careful to try to slow down the landing speed. You must not accidentally drop the truck to the end.
2, Do not use the rushing - slam brakes unloading. Because the inertial force of the slamming truck is very large (usually 5~20 times of the rated lifting force), it is easy to cause permanent deformation of the frame, the welding of the carriage and the frame, the burning of the oil pump or the destruction of the sealing ring, the destruction of the hydraulic cylinder and the like. The service life of the vehicle is reduced, and in serious cases, there will be a rollover accident. Therefore, the general dump truck is prohibited from driving when lifting.
HOT PROUCTS: Heavy Duty Dump Truck, Mini Dump Truck