This wrecker has the functions of lifting, pulling, lifting, etc. It is convenient, quick, good-looking, safe and reliable. This truck wrecker is widely used in highways, public security traffic police, airports, terminals, auto repair industry and highway companies, etc.
Wrecker truck equipped with lifting winch device and wheel bracket which can lift, towing, back load and transport.Widely used in road, police traffic, airports, docks, auto repair company, industry and highway departments, timely, fast clean-up accident, failure, illegal and other vehicles.
Road wrecker is used for safety salvage of vehicles subject to city road, suburb way, highway, airport and bridge road. It is suitable for medium and small-sized cargos, cars and other special vehicles, which are allowed within the technical parameters of this kind
The tow wrecker is called the road wrecker, also known as road rescue vehicle. It has many functions such as lifting, pulling and lifting traction.
The INT series is out integrated line of tow trucks commonly called wreckers. We have a wide range of products with 6 different models ranging for the small 3 ton to the massive 60 ton with a 3 stage boom.
ABS（Anti-Lock Braking System）is a very important safety device in the vehicles, which is used to prevent the wheel from being locked and dragged when braking the vehicles, so as to improve the directional stability, steering maneuverability and braking distance during the braking process of the vehicles.
1. When welding the vehicle, the ABS power harness must be unplugged, otherwise the ECU will be damaged.
2. When installing the wheel, the sensor should be pushed to the bottom to ensure the gap between the sensor and the ring gear. When installing the wheel hub, pay attention to it and do not install it wildly.
3. The trailer is equipped with a pipeline filter, which needs to be cleaned once every three months to ensure that the pipeline is clean to prevent damage to the ABS.
4. When braking on wet road, it is not necessary to use continuous jog, just full brake.
5. Always check whether the sensor connector is loose. If it needs to be replaced, it can't be inserted incorrectly. It is necessary to ensure that the gas path and the sensor correspond one-to-one. The same side brake air pipe corresponds to the same side air outlet of the combined valve.
6. When the wheel hub is being serviced, care should be taken not to damage the surface of the ring gear. If the surface of the ring gear is dusty or oily, it needs to be cleaned and the wheel speed sensor needs to be cleaned.
7. Do not flush the combination valve directly with water when washing the car, otherwise the ABS system will be faulty.
8. Since most brakes are conventional brakes, ABS does not participate in the braking process and therefore does not generally cause high temperatures in the wheels, but abnormally high temperatures may affect the sensor.
9. Ensure that there is no air leakage and no air pressure shortage in the brake circuit of the tractor, and ensure that the tractor has regular braking.
10. In case of failure, the user shall not dismantle the parts of the ABS system by himself, and should consult or deal with the ABS manufacturer or the company's after-sales service department.
please read on, stay posted, subscribe, and we welcome you to tell us what you think.
online service
0086-27870584170086-7223801382
info@chengli-trucks.com
truck0809
8615072324118
