Customized 6m+12m Van Type Superchain Mobile Medical Examination Semi-trailer
Two semi-trailer bodies coupled end to end form one mobile primary-care facility, covering consultation, imaging and laboratory work in one visit.
Featuring full hydraulic operation, it includes a back pressure valve, high-pressure hydraulic filter, two-way balance valves, and special hydraulic lines for plateau conditions.
This wrecker has the functions of lifting, pulling, lifting, etc. It is convenient, quick, good-looking, safe and reliable. This truck wrecker is widely used in highways, public security traffic police, airports, terminals, auto repair industry and highway companies, etc.
Wrecker truck equipped with lifting winch device and wheel bracket which can lift, towing, back load and transport.Widely used in road, police traffic, airports, docks, auto repair company, industry and highway departments, timely, fast clean-up accident, failure, illegal and other vehicles.
Road wrecker is used for safety salvage of vehicles subject to city road, suburb way, highway, airport and bridge road. It is suitable for medium and small-sized cargos, cars and other special vehicles, which are allowed within the technical parameters of this kind
The tow wrecker is called the road wrecker, also known as road rescue vehicle. It has many functions such as lifting, pulling and lifting traction.
A 4,400 mm insulated clinic body mounted on the ISUZU KV600 chassis, laid out as a working DR room, ECG station and laboratory in one 8,000 kg vehicle. Built for outreach programmes, company medical schemes and community screening that cannot wait for patients to travel.
Brand:
CLVEHICLES.COMModel No.:
CLW5080XYLMinimum Order Quantity:
1 UnitPrice:
USD 80000Payment Terms:
T/T, L/C, Western UnionDelivery Time:
90~120 days after we get the depositShipping:
Ro-Ro/Bulk cargo/Container shipment / SKD / CKD / etcISUZU KV600 4x2 132hp LHD Mobile Clinic Truck
A clinic that arrives with the patient.
A commercial chassis engineered around a clinical floor plan
The KV600 is a light-duty ISUZU chassis with a single-row cab, a 3,815 mm wheelbase and an 8,000 kg gross vehicle weight. That combination gives the conversion a long, level floor for three clinical areas while staying inside the driving envelope of a standard light truck: 6,900 mm overall length and 105 km/h top speed.
The body is a sealed, waterproof box with heat and sound insulation built into the wall cavity. Inside, the layout is divided into a DR area with six-sided lead sheet protection, an ECG area and a laboratory with a drug-test bench, served by ceiling ducting that distributes conditioned air evenly across the medical space.
Power comes from the 4KH1CN6HB 2,999 ml water-cooled four-stroke turbocharged diesel, rated 132 hp at 2,900 rpm with 290 N·m from 1,500 rpm. A six-speed gearbox, hydraulic power steering and air brakes with ABS keep a fully equipped clinic predictable to drive between sites.
Access was designed for patients rather than cargo: a hidden boarding ladder stows under the entrance, the body carries side fencing on both flanks, and emergency lighting is fitted at the shelter entrance for evening arrivals.

Eight services delivered at the kerbside
The body is specified around the services most often run from a mobile unit. Each service maps to a defined working area inside the vehicle, so a screening day can move from registration to imaging, sampling and counselling without reconfiguring the cabin.
|
01
Annual physical examConsultation and vitals in the DR area, with the workbench and medical swivel chair as the examination station. |
02
X-rayChest and skeletal imaging in a dedicated DR room lined with lead sheet on all six sides. |
03
LaboratoryBench space for sample handling and on-board testing under even conditioned air supply. |
04
ECGA separate ECG area keeps cardiac screening clear of the imaging workflow and patient queue. |
|
05
Drug testA defined laboratory and drug-test area for supervised collection and rapid screening. |
06
VaccinationCold-chain compatible fit-out optionally arranged for immunisation drives and booster rounds. |
07
Family planningA private, enclosed cabin for counselling sessions with discreet entry and exit. |
08
Mental wellnessSound-insulated walls and a quiet interior make the space usable for confidential consultations. |

Why operators choose a converted light truck
|
01
Purpose-built chassis, not a trailerAn 8,000 kg GVW and 3,815 mm wheelbase give the clinic a stable working floor and a driving footprint that fits urban roads, ferry decks and site gates. |
02
Torque where a loaded truck needs it290 N·m from 1,500 rpm and 132 hp at 2,900 rpm move a fully fitted body with clinical equipment at up to 105 km/h. |
03
Sealed, insulated, waterproof bodyHeat and sound insulation fills the space between shell and inner wall, so the cabin holds temperature and keeps imaging and lab work quiet. |
|
04
Six-sided lead-shielded DR roomThe DR room walls are lined with lead sheet protection on six sides, separating X-ray work from staff and patient circulation. |
05
Even air distributionDedicated air-conditioning immersion ducts run to the medical area so conditioned air reaches each zone instead of pooling at one end of the box. |
06
Built for temporary sitesHidden boarding ladder, body-side fencing and emergency lighting at the entrance make the vehicle workable on unprepared ground after dark. |
Construction, from shell to workbench
Nothing inside the body is left as bare steel. Each layer below is part of the delivered specification, not an optional extra.
All reinforced steel is anti-rust pre-treated and treated again after welding. Screws, nuts and fasteners are rust-proofed throughout, and every exterior fastener is stainless steel.
The cavity between outer shell and inner wall is filled with environmentally friendly, flame-retardant heat and sound insulation for a sealed, waterproof cabin.
The DR room is lined with lead sheet protection on six sides, isolating X-ray work from the ECG and laboratory zones and from the entrance.
Air-conditioning immersion ducts are added so conditioned air is supplied evenly across the whole medical area rather than to a single outlet.
A bamboo plywood sub-floor carries medical-grade floor leather, giving a level, cleanable surface that tolerates trolleys and swivel chairs.
Wooden paint-free board units with a physical and chemical board countertop, drawers and storage cabinets beneath the working surface; a medical operation swivel chair is supplied.
Interior lamps provide both general cabin lighting and task lighting for each equipment cabin and skirt box, with emergency lighting at the shelter entrance.
A hidden boarding ladder is installed under the entrance and exit, and fencing runs along the left and right sides of the body for safe movement on site.
Built to your service list, not ours
The body is a starting layout. Zones, cabinetry, finishes and livery are agreed against the services you actually deliver, then documented before the build starts.
Send your requirements
Department list, daily patient volume, discharge port, road width and height limits, and the technical clauses of your tender.
We return a layout and a price
Floor plan with dimensions, equipment schedule and an FOB or CIF quotation, normally over two revision rounds.
Sign the specification
The counter-signed specification becomes the basis of production and inspection; production starts on the 50% deposit.
60 working days of build
Video factory audits, third-party inspection (SGS, BV and similar) and equipment witness testing are welcome during this period.
Bulk-vessel shipment
Balance settled before loading; packing list, certificate of origin and vehicle documents supplied.
Training and cover
On-site training, engineer deployment or a service workshop as agreed in the contract.
How is the X-ray room protected?
The DR room walls are lined with lead sheet protection on six sides. Shielding is specified against the imaging equipment installed, so the thickness and coverage are confirmed with your equipment supplier before production.
Can the interior layout and exterior paint be changed?
Yes. Exterior spray painting is listed as customizable, and the clinical zones, cabinetry, worktops, ducting and finishes can be agreed per project. Changes are documented in the build specification before the vehicle enters production.
What exactly does the warranty include?
12 months or 10 000 km from the bill-of-lading date, whichever comes first. Failed parts other than normal wear and fast consumables are sent free by DHL, UPS or FEDEX, then supplied at cost price. Expected service life is 10 years with spare-part availability, and telephone and e-mail technical support is not time-limited.
Is medical equipment included?
The declared specification covers the chassis and the converted body, including insulation, lead shielding, cabinetry, floor, lighting and air ducting. Imaging, laboratory and diagnostic equipment are specified separately according to the services you operate.
What conditions can the vehicle work in?
The body is sealed and waterproof with heat and sound insulation, conditioned air is ducted across the medical area, and emergency lighting is fitted at the entrance. The vehicle is intended for road-based outreach work, not off-road operation.
Send the department list and the discharge port; we return a dimensioned floor plan with a quotation on your trade terms.
Product Parameters
|
Chassis Specification |
||
|
Cab |
ISUZU KV600 single row cabin |
|
|
Driving Type |
4*2 left hand drive |
|
|
Max Speed (km/h) |
105 |
|
|
Overall dimension (mm) |
Approx. 6900×2450×2900 |
|
|
Mass in working order (kg) |
Approx. 4480 |
|
|
GVW (kg) |
8000 |
|
|
Wheelbase (mm) |
3815 |
|
|
F/R track base (mm) |
1504/1425 |
|
|
F/R overhang (mm) |
1015/2450 1015/2420 1015/2420 |
|
|
Approach/Departure Angel |
24/9 |
|
|
Tire |
7.50R16 (6+1) |
|
|
Clutch |
Single-plate dry diaphragm spring clutch |
|
|
Steering |
Hydraulic steering with power assistance |
|
|
Gear box |
6-speed |
|
|
Bridge |
Front axle |
3T |
|
Rear axle |
5T |
|
|
Engine |
Model |
4KH1CN6HB |
|
Fuel Type |
Diesel fuel |
|
|
Type |
Water-cooled four-stroke, direct injection, turbocharged |
|
|
Exhaust (ml) |
2999 |
|
|
Max output power/rotate speed(hp/rpm) |
132/2900 |
|
|
Max torque/rotate speed (N.m/rpm) |
290/1500 |
|
|
Braking system |
Service Brake |
Air brake with ABS |
|
Park Brake |
Spring energy |
|
|
Superstructure specification |
||
|
Van box (clinic cabin) |
||
|
Size (mm) |
4400*2550 |
|
|
Plate material |
Sealed, waterproof, heat and sound insulation |
|
|
Door open |
Right side door open |
|
|
Functional aera |
DR aera, ECG aera, Laboratory and drug test area |
|
|
Outside |
||
|
Boarding ladder |
Install a hidden boarding ladder under the entrance and exit |
|
|
Van body down fencing |
Left and right side |
|
|
Exterior spray painting |
Customizable |
|
|
Inside |
||
|
Main structural materials |
All reinforced steel materials are anti-rust pre-treatment, and then anti-rust treatment after welding. All screws, nuts and other fasteners are rust-proofed. All exterior fasteners are stainless steel material |
|
|
Insulation materials |
The space between body shell and the inner wall are filled with environmentally friendly flame-retardant heat and sound insulation materials. |
|
|
Inner wall |
Environmentally friendly flame retardant materials |
|
|
DR room wall |
Lead sheet protection on 6 sides |
|
|
Interior |
Environmentally friendly flame retardant materials |
|
|
Air conditioning duct |
Add air-conditioning immersion ducts to ensure that the air-conditioning can evenly supply air to the medical area. |
|
|
Floor |
The bottom layer is laid with bamboo plywood and medical floor leather. |
|
|
Workbench cabinets |
Wooden paint-free board material, physical and chemical board countertop, drawers and storage cabinets under the countertop |
|
|
Work chair |
Medical operation swivel chair |
|
|
Interior lighting |
Lighting lamps are used for interior lighting and working lighting for each equipment cabin skirt box; emergency lighting is installed at the boarding entrance of the shelter. |
|
online service
0086-2787058417
0086-7223801382
info@chengli-trucks.com
truck0809
8615072324118